Turn signal lamps/side marker lamps

► Switch off the lights. ► Open the hood. ► Turn bulb holder 1 (WY 5 W)/2 (3457A) counter-clockwise and pull it out. ► Remove the bulb from bulb holder 1/2. ► Inse ...

Opening and closing the side trimpanels

You must open the side trim panel in the cargo compartment before you can change the bulbs in the tail lamps. Left-hand side trim panel ► To open: turn release knob 1 90° in the directio ...

See also:

Commandshift
If CommandShift™ is selected in high range, gears 1 or 2 may be used for moving off from stationary. In low range, gears 1, 2 or 3 may be used, which may prove useful in certain off-road driving ...

How to Add Coolant to the Surge Tank
WARNING You can be burned if you spill coolant on hot engine parts. Coolant contains ethylene glycol and it will burn if the engine parts are hot enough. Do not spill coolant on a hot engine. ...

Starting the Vehicle
1. Aim the RKE transmitter at the vehicle. 2. Press and release . 3. Immediately after completing Step 2, press and hold until the turn signal lamps flash. When the vehicle starts, the parking la ...