Infiniti QX: Most common factors contributing to vehicle corrosion - Cleaning interior - Appearance and care - Infiniti QX Owner's ManualInfiniti QX: Most common factors contributing to vehicle corrosion

Infiniti QX / Infiniti QX Owner's Manual / Appearance and care / Cleaning interior / Most common factors contributing to vehicle corrosion

► The accumulation of moisture-retaining dirt and debris in body panel sections, cavities, and other areas.
► Damage to paint and other protective coatings caused by gravel and stone chips or minor traffic accidents.

    Environmental factors influence the rate of corrosion
    Moisture Accumulation of sand, dirt and water on the vehicle body underside can accelerate corrosion. Wet floor coverings will not dry completely inside the vehicle, and should be removed for ...

    See also:

    Tire and Loading Information Label
    Label Example A vehicle specific Tire and Loading Information label is attached to the center pillar (B-pillar). With the driver door open, you will find the label attached below the door lock po ...

    How to Check Lubricant
    To get an accurate reading, the vehicle should be on a level surface. A. Drain Plug B. Fill Plug If the level is below the bottom of the fill plug hole, located on the transfer case, some lubric ...

    Rear seat head restraints
    WARNING   For safety reasons, always drive with the rear head restraints in the upright position when the rear seats are occupied. Keep the area around head restraints clear of articles ...