Infiniti QX: Environmental factors influence the rate of corrosion
Moisture
Accumulation of sand, dirt and water on the vehicle body underside can accelerate corrosion. Wet floor coverings will not dry completely inside the vehicle, and should be removed for drying to avoid floor panel corrosion.
Relative humidity
Corrosion will be accelerated in areas of high relative humidity, especially those areas where the temperatures stay above freezing where atmospheric pollution exists, or where road salt is used.
Temperature
A temperature increase will accelerate the rate of corrosion to those parts which are not well ventilated.
Air pollution
Industrial pollution, the presence of salt in the air in coastal areas, or heavy road salt use will accelerate the corrosion process. Road salt will also accelerate the disintegration of paint surfaces.
Most common factors contributing to vehicle corrosion
► The accumulation of moisture-retaining
dirt and debris in body panel sections,
cavities, and other areas.
► Damage to paint and other protective
coatings caused by gravel and sto ...
To protect your vehicle from corrosion
► Wash and wax your vehicle often to
keep the vehicle clean.
► Always check for minor damage to the
paint and repair it as soon as possible.
► Keep drain holes at the bottom ...
See also:
Road testing dynamometers (rolling roads)
It is essential that any dynamometer testing is carried out only by a qualified
person, familiar with the dynamometer testing and safety procedures practiced by
Land Rover Retailer/ Authorized Rep ...
Exterior Lighting
The exterior lamps control is located on the instrument panel to the left of
the steering wheel.
: Turns off the automatic headlamps
and Daytime Running Lamps (DRL). Turning the headlamp control ...
Tire pressure of at least 180 kPa(1.8 bar/26 psi) is not reached
If, after five minutes, a pressure of 180 kPa
(1.8 bar/26 psi) has not been achieved:
► Press the on/off switch on the tire
inflation
compressor to 0.
The tire inflation compressor is ...
