Seat belts

The seat belts can be cleaned by wiping them with a sponge dampened in a mild soap solution. Allow the belts to dry completely before using them. See “Seat belts” in the “1. Safety — s ...

Most common factors contributing to vehicle corrosion

► The accumulation of moisture-retaining dirt and debris in body panel sections, cavities, and other areas. ► Damage to paint and other protective coatings caused by gravel and sto ...

See also:

Using OnStar® Destination Download (US and Canada)
Press the blue OnStar button and an Advisor can locate a point-of-interest or an address and download the necessary information or coordinates to your navigation system. Once the destination is down ...

How to Check Lubricant
To get an accurate reading, the vehicle should be on a level surface. For Two-Wheel-Drive vehicles, the proper level is from 15mm to 40mm (0.6 in to 1.6 in) below the bottom of the filler plug ...

Weight-Distributing Hitch Adjustment
A. Body to Ground Distance B. Front of Vehicle When using a weight-distributing hitch, the spring bars should be adjusted so the distance (A) is the same after coupling the trailer to the tow veh ...