Range Rover: Using the trip computer - Message center - Range Rover Owner's ManualRange Rover: Using the trip computer

A short press (1 second or less) or a series of short presses of the i button

A short press (1 second or less) or a series of short presses of the i button will change the trip computer display. The options available are:

  • • Date and Odometer.
  • • Trip distance.
  • • Trip average speed.
  • • Trip average fuel consumption.
  • • Instantaneous (short term average) fuel consumption.
  • • Range available from remaining fuel.
  • • Blank display.

To reset the trip computer values to zero, press and hold the i button for 2 seconds.

To reset the fuel consumption figure, press and hold the i button until the display clears.

To reset trip A or trip B memory, display the trip memory you wish to reset, then press and hold the i button until the message Resetting Trip A or B is displayed. Continue to hold the button for another 2 seconds to reset the Auto trip memory.

The Auto trip memory also resets automatically each time the engine is started and the vehicle moves.

Trips may be added together to record a continuous journey. Press the i button when Auto memory figures are displayed, and Adding previous journey will appear on the screen. Press the i button for longer than 1 second, and previous trip information will be added to the current trip and the cumulative total displayed.

If you wish to delete the trip you have added, again press the i button while displaying the Auto memory figures. Deleting previous journey will appear on the screen. While this message is displayed, press and hold the i button for longer than 1 second. The previous trip will be deleted from the total.

    Trip computer
    The computer memory stores data for a journey or series of journeys until it is reset to zero. The displayed information is for guidance only, as it can be affected by traffic, road and weather co ...

    Trip distance
    Distance travelled since the last memory reset. The maximum trip reading is 9 999.9 (miles or kilometers). The computer will automatically reset to zero if this distance is exceeded. ...

    See also:

    File System and Naming
    The song name that displays is the song name that is contained in the ID3 tag. If the song name is not present in the ID3 tag, then the radio displays the file name without the extension (such as .m ...

    Event Data Recorders (EDR)
    This vehicle is equipped with an Event Data Recorder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situations, such as an air bag deployment or hitting a ...

    To erase all programing
    For first time programing, ensure that the engine is switched off: 1. Ensure that the ignition is on (but with the engine switched off). 2. Press and hold the two outer buttons on the transceiver in ...