Infiniti QX: HomeLink® Universal Transceiver
HomeLink® Universal Transceiver provides
a convenient way to consolidate the functions
of up to three individual hand-held
transmitters into one built-in device.
HomeLink® Universal Transceiver:
► Will operate most Radio Frequency (RF)
devices such as garage doors, gates,
home and office lighting, entry door
locks and security systems.
► Is powered by your vehicle’s battery. No
separate batteries are required. If the
vehicle’s battery is discharged or is
disconnected, HomeLink® will retain all
programming.
Once HomeLink® Universal Transceiver is
programmed, retain the original transmitter
for future programming procedures
(Example: new vehicle purchases). Upon
sale of the vehicle, the programmed
HomeLink® Universal Transceiver buttons
should be erased for security purposes.
For additional information, see “Programming
HomeLink®” later in this section.
WARNING
► Do not use HomeLink® Universal Transceiver
with any garage door opener that
lacks safety stop and reverse features as
required by federal safety standards.
(These standards became effective for
opener models manufactured after April
1, 1982.) A garage door opener which
cannot detect an object in the path of a
closing garage door and then automatically
stop and reverse, does not meet
current federal safety standards. Using a
garage door opener without these features
increases the risk of serious injury
or death.
► During programming procedure, your
garage door or security gate may open
or close. Make sure that people and
objects are clear of the garage door,
gate, etc. that you are programming.
► Your vehicle’s engine should be turned
off while programming HomeLink® Universal
Transceiver.
- Programming HomeLink®
- Programming HomeLink® for Canadian customers
- Operating the HomeLink® Universal Transceiver
- Programming trouble-diagnosis
- Clearing the programmed information
- Reprogramming a single HomeLink® button
- If your vehicle is stolen
Cargo light
The cargo light switch has three positions: ON 1 , center 2 and OFF 3 . ON position When the switch is in the ON position 1 , the cargo light will illuminate. Center position When the sw ...Programming HomeLink®
To program your HomeLink® Universal Transceiver to operate a garage door, gate, or entry door opener, home or office lighting, you need to be at the same location as the device. Note: Garage ...See also:
Operating manual lift gate
To open the lift gate, unlock it and push the
lift gate opener switch A . Pull up the lift
gate to open.
The lift gate can be unlocked by:
► pushing the unlock button on the
Intellig ...
Overview of occupant safety
In this section, you will learn the most
important facts about the restraint system
components of the vehicle.
The restraint system consists of:
• seat belts
• child restraint systems
• ...
Using the TIREFIT kit
You can use the TIREFIT kit to seal small
punctures, particularly those in the tire tread.
You can use TIREFIT at outside temperatures
down to -4 °F (-20 °C).
WARNING
TIREFIT is a ...