Infiniti QX: Operating manual lift gate
To open the lift gate, unlock it and push the
lift gate opener switch A . Pull up the lift
gate to open.
The lift gate can be unlocked by:
► pushing the unlock button on the
Intelligent Key twice.
► pushing the lift gate request switch with
the Intelligent Key carried on you.
► pushing the door handle request switch
twice with the Intelligent Key carried on
you.
► pushing the power door lock switch to
the unlock position.
► inserting the mechanical key into the
driver’s door key cylinder and turning it
to the rear of the vehicle twice.
To close the lift gate, pull down until it
securely locks.
Lift gate
WARNING ► Always be sure the lift gate has been closed securely to prevent it from opening while driving. ► Do not drive with the lift gate open. This could allow dangerous exha ...Operating power lift gate
To operate the power lift gate, the selector lever must be in the P (Park) position. The power lift gate will not operate if the battery voltage is low. Power lift gate main switch The power ...See also:
Vehicle remote opening
If you have unintentionally locked your
vehicle (e.g. the SmartKey is still in the
vehicle) and a replacement SmartKey is not
available, the vehicle can be opened by a
Mercedes-Benz Customer Assis ...
Uniform Tire Quality Grading
Quality grades can be found where applicable on the tire sidewall between tread
shoulder and maximum section width. For example: ...
Using TMC
Dynamic route guidance will calculate an alternative route to avoid a traffic
event when the system receives an event warning. The system calculates a new route
for all sections. However, if any w ...