Range Rover: Xenon headlamp bulb replacement
1. Twist and lift off the domed cap.
2. Rotate the collar securing the bulb to the lamp and release the bulb.
3. Pull off the electrical connector and remove the bulb unit.
4. Insert the new bulb unit and reverse the above procedure. Ensure that the lugs on the cap are in contact with the bulb base.
Xenon lamps
WARNING High voltage is required to ignite the gas and metal vapor which are used to power Xenon lamps. Contact with this voltage can cause serious injury. Replacement or maintenance of Xeno ...Front fog lamp bulb replacement
1. Rotate the bulb holder (counter-clockwise) and remove from the lamp unit. 2. Press the two clips together, and remove the electrical connector. ...See also:
RBDS-TMC display
When a TMC signal is received the icon in the top left of the screen will appear
green. If a TMC signal is not being received, the icon will be shown with a bar
through it.
The system will inform ...
Extra features
There are more features available than can be displayed at one time. This menu
allows the selected features to be displayed, for example:
• Ambient lighting: While the headlamps are turned on, se ...
Transfer case
The vehicle has permanent 4-wheel drive
(4MATIC). Power is always transmitted to
both axles.
Performance tests may only be carried
out on a 2-axle dynamometer. The brake
system or transfer ca ...