Preparing the vehicle

Your vehicle may be equipped with a "Minispare" emergency spare wheel or MOExtended tires (tires with run-flat properties). Vehicle preparation is not necessary on vehicles with MOEx ...

Using the TIREFIT kit

You can use the TIREFIT kit to seal small punctures, particularly those in the tire tread. You can use TIREFIT at outside temperatures down to -4 °F (-20 °C). WARNING   TIREFIT is a ...

See also:

How to Check Lubricant
To get an accurate reading, the vehicle should be on a level surface. For Two-Wheel-Drive vehicles, the proper level is from 15mm to 40mm (0.6 in to 1.6 in) below the bottom of the filler plug ...

Checking the coolant level
NOTICE Running the engine without coolant will cause serious engine damage. The coolant level in the expansion tank should be checked at least weekly (more frequently in high mileage or arduo ...

Removing the Flat Tire and Installing the Spare Tire
1. Do a safety check before proceeding. See If a Tire Goes Flat   for more information. 2. To remove the center cap, place the chiseled end of the wheel wrench in the slot on the wheel an ...