Mercedes-Benz GL-Class: Interior lighting control - Interior lighting - Lights and windshield wipers - Mercedes-Benz GL-Class Owner's ManualMercedes-Benz GL-Class: Interior lighting control

Important notes

In order to prevent the vehicle's battery from discharging, the interior lighting functions are automatically deactivated after some time except for when the SmartKey is in position 2 in the ignition lock.

Automatic interior lighting control

To switch on/off: press the button.

When the automatic interior lighting control is activated, the button is flush with the overhead control panel.

The interior lighting automatically switches on if you:

unlock the vehicle
open a door
remove the SmartKey from the ignition lock

The interior light is activated for a short while when the SmartKey is removed from the ignition lock. You can activate this delayed switch-off using the on-board computer.

Manual interior lighting control

To switch the front interior lighting on/off: press the ► To switch the rear interior lighting button.
To switch the rear interior lighting on/off: press the ► To switch the reading lamps on/off: button.
To switch the reading lamps on/off:

press the Crash-responsive emergency lighting button.

    Overview of interior lighting
    Overhead control panel 1 Switches the left-hand front reading lamp on/off 2 Switches the rear interior lighting on/off 3 Switches the automatic interior lighting control on/off 4 Swit ...

    Crash-responsive emergency lighting
    The interior lighting is activated automatically if the vehicle is involved in an accident. ► To switch off the crash-responsive emergency lighting: press the hazard warning lamp button. ...

    See also:

    Anti-lock braking system (ABS) (Amber)
    Illuminates briefly as a bulb check when the ignition is switched on. If the lamp remains on or illuminates while driving, there is a fault with the ABS system. Drive with care, avoiding heavy br ...

    Operating tips
    ► The images from a device that is connected to the rear auxiliary input jacks cannot be viewed on the front displays. ► It is not possible to switch the source to USB (if so equ ...

    When the System Does Not Seem To Work Properly
    Missed alerts can occur under normal circumstances and will increase in wet conditions. The system does not need to be serviced. SBZA is designed to ignore stationary objects; however, the system ma ...