Calling up a stored setting

► Press and hold the relevant storage position button 1, 2 or 3 until the seat, steering wheel and exterior mirrors are in the stored position. The setting procedure is interrupted as soon ...

Useful information

This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differences are ...

See also:

Clock
The analog clock is not connected with any other vehicle system and runs by itself. To adjust the clock, do the following: 1. Locate the adjustment button, near the lower left corner of the clock. ...

Selecting HDC
1. Press to switch HDC on and off. 2. Press to increase the set speed. 3. Press to decrease the set speed. HDC can be selected at speeds below 50 mph (80 km/h). HDC can be used in D, R or Comman ...

Climate control
1. Temperature controls. 2. Seat heaters: Press once to turn on high, twice to turn on low, and a third time to turn off. 3. Air distribution buttons: Press to select the desired distribution se ...