Mercedes-Benz GL-Class: Restoring the factory settings - SmartKey - Opening/closing - Mercedes-Benz GL-Class Owner's ManualMercedes-Benz GL-Class: Restoring the factory settings

Press the simultaneously for approximately six buttons simultaneously for approximately six seconds until the battery check lamp flashes twice.

    Changing the settings of the lockingsystem
    You can change the setting of the locking system in such a way that only the driver's door and the fuel filler flap are unlocked. This is useful if you frequently travel on your own. ► To ch ...

    Mechanical key
    General notes If the vehicle can no longer be unlocked with the SmartKey, use the mechanical key. If you use the mechanical key to unlock and open the driver's door, the anti-theft alarm system ...

    See also:

    Changing the set speed whilethe vehicle is in motion
    When DSR is activated, the control speed can be changed to a value between 3 mph and 10 mph (Canada: between 4 km/h and 18 km/h) during the journey. ► To increase or decrease in 1 mph (Ca ...

    Service and literature
    Your vehicle is covered under the terms of the warranties printed in the Service and Warranty Information booklet. Your authorized Mercedes-Benz Center will exchange or repair any defective parts ...

    License plate lamp bulb replacement
    1. Using a small flat-bladed screwdriver, carefully prize the lamp from the tailgate. 2. Twist the bulb holder counter-clockwise to unlock then pull to remove. Pull out the bulb to remove. ...