Range Rover: Under hood covers - removal - Maintenance - Range Rover Owner's ManualRange Rover: Under hood covers - removal

1. Press the tabs to release the cover from the casing. Note: Releasing the inboard

1. Press the tabs to release the cover from the casing. Note: Releasing the inboard tab on the front edge of the cover first will make it easier to release the remaining tabs.

2. Lift the front edge of the cover and slide forwards to remove.

    Engine compartment overview
    1. Dynamic response fluid reservoir cap. 2. Brake fluid reservoir cap. 3. Engine oil filler cap. 4. Engine coolant filler cap. 5. Windshield washer fluid filler cap. 6. Power steering fluid fil ...

    Under hood covers - refitting
    NOTICE Before refitting the underhood covers, ensure that no pipes, cables or other items, have been trapped between the cover and casing. 1. Slide the rear edge of the cover under the rubber ...

    See also:

    Air Vents
    Use the slider switch in the center of the outlet, to change the direction of the airflow. Use the thumbwheel near the outlet to control the amount of airflow or to shut off the airflow. Keep all ...

    Anti-theft Alarm System Messages
    SERVICE THEFT DETERRENT SYSTEM This message displays when there is a problem with the theft-deterrent system. The vehicle may or may not restart so you may want to take the vehicle to your dealer ...

    Glare from the side
    ► Fold down sun visor 1. ► Pull sun visor 1 out of retainer 3. ► Swing sun visor 1 to the side. ► Vehicles with a sliding sunroof: slide sun visor 1 horizontally as desir ...