Infiniti QX: Around ViewTM Monitor settings
To set up the Around View Monitor to your preferred settings, push the SETTING button, select the “Other” key and then select the “Camera” key.
Predictive Course Lines:
When this item is turned to ON, the predictive course lines is displayed in the front and the rearview.
Camera View Priority:
The view shown on the screen at the beginning of around view monitor operation can be selected in order of priority.
Non-viewable Area Reminder:
With this item turned to ON, the nonviewable area is highlighted in yellow for 7 seconds after the bird-eye view is displayed.
Sonar Beep:
When this item is turned to ON, you will hear a tone sound when the corner sonar indicator appears.
Sonar Display:
When this item is turned to ON, the corner sonar indicator is displayed in the frontside view.
Corner Sonar Sensitivity:
Adjust the sensitivity level of the corner sonar higher (right) or lower (left).
How to adjust the screen view
To adjust the Display ON/OFF, Brightness,
Tint, Color, Contrast and Black Level of the
Around View Monitor, push the SETTING
button with the Around View Monitor on,
select the item key and adj ...
Operating tips
► The screen displayed on the Around
View Monitor will automatically return
to the previous screen 3 minutes after
the CAMERA button has been pushed
while the selector lever is in a posi ...
See also:
Liftgate
The liftglass or liftgate cannot be opened if the rear wiper is in motion. Attempting
to open the liftglass or liftgate while the rear wiper is in motion will cause the
release of the liftglass or ...
Low oil pressure (red)
Illuminates as a bulb check when the ignition is switched on and extinguishes
when the engine is started. If the lamp remains on, flashes, or illuminates while
driving, stop the vehicle as soon ...
Replacing Brake System Parts
The braking system on a vehicle is complex. Its many parts have to be of top
quality and work well together if the vehicle is to have really good braking. The
vehicle was designed and tested with to ...
