Infiniti QX: Operating tips
► The screen displayed on the Around
View Monitor will automatically return
to the previous screen 3 minutes after
the CAMERA button has been pushed
while the selector lever is in a position
other than the R (Reverse) position.
► The display of images on the screen
may be delayed after screens are
switched. Objects in the Around View
Monitor may be distorted momentarily
until the Around View Monitor screen is
displayed completely.
► When the temperature is extremely high
or low, the screen may not display
objects clearly. This is not a malfunction.
► When strong light directly shines on the
camera, objects may not be displayed
clearly. This is not a malfunction.
► The screen may flicker under fluorescent
light. This is not a malfunction.
► The colors of objects on the Around
View Monitor may differ somewhat
from those of the actual object.
► Objects on the monitor may not be clear
and the color of the object may differ in
a dark location or at night. This is not a
malfunction.
► There may be differences in clearness
between each camera view of the birdeye
view.
► If dirt, rain or snow attaches to the
camera, the Around View Monitor may
not display objects clearly. Clean the
camera.
► Do not use alcohol, benzine or thinner
to clean the camera. This will cause
discoloration. To clean the camera,
wipe with a cloth that has been dampened with a diluted mild cleaning
agent and then wipe with a dry cloth.
► Do not damage the camera because the
monitor screen may be adversely affected.
► Do not use wax on the camera window.
Wipe off any wax with a clean cloth that
has been dampened with a mild
detergent diluted with water.
Around ViewTM Monitor settings
To set up the Around View Monitor to your
preferred settings, push the SETTING button,
select the “Other” key and then select
the “Camera” key.
Predictive Course Lines:
When this ite ...
Ventilators
Center ventilators
Open/close the ventilators by moving the
control to either direction.
: This symbol indicates that the
ventilators are
closed. Moving the side control to this
direct ...
See also:
Questions and Answers About Safety Belts
Q: Will I be trapped in the vehicle after a crash if I am wearing a safety belt?
A: You could be— whether you are wearing a safety belt or not. Your chance of
being conscious during and after a cr ...
Lockout Protection
This feature protects you from locking the key in the vehicle when the key is
in the ignition and a front door is open.
If the driver side power door lock switch is pressed when the driver door is ...
Compass
Your vehicle may have a compass in the Driver Information Center (DIC).
Compass Zone
The zone is set to zone eight upon leaving the factory. Your dealer will set
the correct zone for your location. ...