Mercedes-Benz GL-Class: Trip computer "From start" or "Fromreset" - Trip computer menu - Menus and submenus - On-board computer and displays - Mercedes-Benz GL-Class Owner's ManualMercedes-Benz GL-Class: Trip computer "From start" or "Fromreset"

The values in the From Start submenu refer to the start of your journey, while those in the From Reset submenu refer to the last time you reset this submenu.

Press the steering wheel to select the trip button on the steering wheel to select the trip computer menu.
Press the From Start or From Reset. button to select From Start or From Reset.

Trip computer "From start" (example)

Trip computer "From start" (example)

1 Distance
2 Time
3 Average speed
4 Average fuel consumption

The From Start trip computer is reset automatically when:

the ignition has been switched off for more than four hours.
999 hours have been exceeded.
9,999 miles have been exceeded.

When 9,999 hours or 99,999 miles have been exceeded, the trip computer is automatically reset From Reset.

    Resetting values
    ► Press the button on the steering wheel to select the trip computer menu. ► Press the button to select the function that you wish to reset. ► Press and hold the R reset butt ...

    See also:

    Vehicles with extended Off-Road Proengineering package
    Basic settings The extent to which the vehicle is raised or lowered depends on the basic setting selected. Select: • Off-road level 3 for freeing the vehicle in impassable terrain at low s ...

    Front Fog Lamp Light
    The front fog lamp light comes on when the fog lamps are in use. The light goes out when the fog lamps are turned off. See Fog Lamps   for more information. ...

    Storing the current speed or calling upthe last stored speed
    WARNING   The set speed stored in memory should only be set again if prevailing road conditions and legal speed limits permit. Possible acceleration or deceleration differences arising ...