Mercedes-Benz GL-Class: Resetting values
► Press the
button on the
steering wheel to select the trip
computer menu.
► Press the
button to select the
function that you wish to reset.
► Press and hold the R reset button
on the
instrument cluster until the values have
reverted to "0".
Trip computer "From start" or "Fromreset"
The values in the From Start submenu refer
to the start of your journey, while those in the
From Reset submenu refer to the last time
you reset this submenu.
► Press the
button on the
s ...
Calling up the range
► Press
on the steering wheel
to select the trip computer menu.
► Press
to select Range:.
The multifunction display shows the
estimated range of the vehicle, based on
the curren ...
See also:
Overriding the speed and follow mode
Whenever the driver is overriding the ACC by depressing the accelerator pedal,
the ACC will not automatically apply the brakes to maintain separation from any
vehicle ahead.
The set speed and gap ...
Video Screen(s)
The video screen(s) are located in the overhead console.
To use the video screen(s):
1. Push the release button located on the overhead console.
2. Move the screen to the desired position.
When th ...
Stability control warning lamps
The DSC warning lamp in the instrument pack illuminates briefly when the ignition
is turned on.
If the warning lamp flashes rapidly during driving, the system is active.
A fault with the DSC sys ...
