Buick Enclave: Electrical System
- High Voltage Devices and Wiring
- Electrical System Overload
- Fuses and Circuit Breakers
- Engine Compartment Fuse Block
- Instrument Panel Fuse Block
- Wheels and Tires
- Tire Sidewall Labeling
- Tire Designations
- Tire Terminology and Definitions
- Tire Pressure
- Tire Pressure Monitor System
- Tire Pressure Monitor Operation
- Tire Inspection
- Tire Rotation
- When It Is Time for New Tires
- Buying New Tires
- Different Size Tires and Wheels
- Uniform Tire Quality Grading
- Wheel Alignment and Tire Balance
- Wheel Replacement
- Tire Chains
- If a Tire Goes Flat
- Tire Sealant and Compressor Kit
- Storing the Tire Sealant and Compressor Kit
- Tire Changing
- Compact Spare Tire
- Jump Starting
Replacement Bulbs
For replacement bulbs not listed here, contact your dealer. ...
High Voltage Devices and Wiring
WARNING
Exposure to high voltage can cause shock, burns, and even death. The high voltage
components in the vehicle can only be serviced by technicians with special training.
High voltage componen ...
See also:
Window anti-trap protection
WARNING
Before closing a window or the sunroof, ensure that no occupants have any part
of their body in a position where it could be trapped. Even with an anti-trap system,
death or serious ...
Active Fuel Management®
Vehicles with V8 engines may have Active Fuel Management™. This system allows
the engine to operate on either all or half of its cylinders, depending on the driving
conditions. When less power is ...
Tire pressure of at least 180 kPa(1.8 bar/26 psi) is not reached
If, after five minutes, a pressure of 180 kPa
(1.8 bar/26 psi) has not been achieved:
► Press the on/off switch on the tire
inflation
compressor to 0.
The tire inflation compressor is ...
