Buick Enclave: Fuses and Circuit Breakers
The wiring circuits in your vehicle are protected from short circuits by a combination of fuses, circuit breakers and fusible thermal links.
This greatly reduces the chance of fires caused by electrical problems.
Look at the silver-colored band inside the fuse. If the band is broken or melted, replace the fuse. Be sure you replace a bad fuse with a new one of the identical size and rating.
Fuses of the same amperage can be temporarily borrowed from another fuse location, if a fuse goes out. Replace the fuse as soon as you can.
Electrical System Overload
The vehicle has fuses and circuit breakers to protect against an electrical system
overload.
When the current electrical load is too heavy, the circuit breaker opens and
closes, protecting the ci ...
Engine Compartment Fuse Block
The underhood fuse block is located in the engine compartment, on the passenger
side of the vehicle.
Lift the cover for access to the fuse/relay block.
Notice: Spilling liquid on any electrical ...
See also:
Changing a wheel
Flat tire
The "Roadside Assistance" section contains information and notes
on how to deal with a flat tire. It also provides
instructions on changing a wheel or mounting
the spare wheel/ ...
Setting the airflow
► Turn the SmartKey to position 2 in the
ignition lock.
► To increase/reduce: press the
button.
Vehicles with Voice Control System: when the
Voice Control System is switched on, the
...
Socket in the front-compartment centerconsole
If accessories are connected, make sure
that a maximum current draw of 15 A is not
exceeded. Otherwise, you will overload the
fuse.
The socket is not suitable for operating
the tire inflati ...
