Buick Enclave: High Voltage Devices and Wiring
WARNING
Exposure to high voltage can cause shock, burns, and even death. The high voltage
components in the vehicle can only be serviced by technicians with special training.
High voltage components are identified by labels. Do not remove, open, take apart, or modify these components.
High voltage cable or wiring has orange covering. Do not probe, tamper with, cut, or modify high voltage cable or wiring.
Electrical System Overload
The vehicle has fuses and circuit breakers to protect against an electrical system
overload.
When the current electrical load is too heavy, the circuit breaker opens and
closes, protecting the ci ...
See also:
Ride Control System Messages
SERVICE STABILITRAK
This message displays if there is a problem with the StabiliTrak® system. If
this message appears, try to reset the system. Stop; turn off the engine for at
least 15 seconds; ...
Programing
With the engine switched off;
1. Ensure that the ignition system is on.
2. Hold the end of the original garage door opener hand-held transmitter 2 to
6 inches (50 to 150 mm) away from the transc ...
Transmission Messages
MANUAL SHIFT
This message displays when the automatic transmission is in manual mode. See
Manual Mode for more information.
TRANSMISSION HOT IDLE ENGINE
Notice: Do not drive the vehicl ...
