Infiniti QX: Push-button ignition switch
WARNING
Do not operate the push-button ignition
switch while driving the vehicle except in an
emergency. (The engine will stop when the
ignition switch is pushed 3 consecutive
times or the ignition switch is pushed and
held for more than 2 seconds.) If the engine
stops while the vehicle is being driven, this
could lead to a crash and serious injury.
Before operating the push-button ignition switch, be sure to move the selector lever to the P (Park) position.
- Operating range for engine start function
- Push-button ignition switch positions
- Emergency engine shut off
- Intelligent Key battery discharge
Driving safety precautions
Your INFINITI is designed for both normal
and off-road use. However, avoid driving in
deep water or mud as your INFINITI is
mainly designed for leisure use, unlike a
conventional off-road vehi ...
Operating range for engine start function
The operating range for starting the engine
inside the vehicle 1 is shown in the
illustration.
► If the Intelligent Key is on the instrument
panel, cargo area, inside the
glove box o ...
See also:
Fuel E85 (85% Ethanol)
Vehicles that have a FlexFuel badge and a yellow fuel cap can use either unleaded
gasoline or ethanol fuel containing up to 85% ethanol (E85). For all other vehicles,
use only the unleaded gasoline ...
Disclaimer of warranty
NAVTEQ Corporation does not warrant or make any representations regarding, either
express or implied, regarding the use or results of the use of the DATABASE in terms
of its correctness, accuracy, ...
License Plate Lamp
1. Remove the two screws holding each of the license plate lamps to the molding
that is part of the liftgate.
2. Twist and pull the license plate lamp assembly forward through the molding
opening ...
