Infiniti QX: Operating range for engine start function

The operating range for starting the engine
inside the vehicle 1 is shown in the
illustration.
► If the Intelligent Key is on the instrument
panel, cargo area, inside the
glove box or door pocket, or the corner
of interior compartment, it may not be
possible to start the engine.
► If the Intelligent Key is near the door or
door glass outside the vehicle, it may
be possible to start the engine.

When the ignition switch is pushed without
depressing the brake pedal, the ignition
switch position will change as follows:
► Push center once to change to ACC.
► Push center two times to change to ON.
► Push center three times to change to
OFF. (No position illuminates.).
► Push center four times to return to ACC.
► Open or close any door to return to
LOCK during the OFF position.
The ignition lock is designed so that the
ignition switch position cannot be switched
to LOCK until the selector lever is moved to
the P (Park) position.
When the ignition switch cannot be pushed
toward the LOCK position, proceed as
follows:
1. Move the selector lever into the P (Park)
position.
2. Push the ignition switch to the OFF
position. The ignition switch position
indicator will not illuminate.
3. Open the door. The ignition switch will
change to the LOCK position.
The selector lever can be moved from the P
(Park) position if the ignition switch is in
the ON position and the brake pedal is
depressed.
If the battery of the vehicle is discharged,
the push-button ignition switch cannot be
turned from the LOCK position.
Some indicators and warnings for operation
are displayed on the dot matrix liquid
crystal display between the speedometer
and tachometer. (See “Dot matrix liquid
crystal display” in the “2. Instruments and
controls” section.)
Push-button ignition switch
WARNING
Do not operate the push-button ignition
switch while driving the vehicle except in an
emergency. (The engine will stop when the
ignition switch is pushed 3 consecutive
times or the ...
Push-button ignition switch positions
LOCK (Normal parking position)
The ignition switch can only be locked in
this position.
The ignition switch will be unlocked when
it is pushed to the ACC position while
carrying the Intellige ...
See also:
Brake assist
When the force applied to the brake pedal
exceeds a certain level, the Brake Assist is
activated generating greater braking force
than a conventional brake booster even
with light pedal force. ...
Interior lighting control
Important notes
In order to prevent the vehicle's battery from
discharging, the interior lighting functions are
automatically deactivated after some time
except for when the SmartKey is in positio ...
Satellite radio reception
Satellite radio can significantly increase the number of radio channels available.
Where satellite signal strength is adversely affected by terrain, ground transmitters
are used to relay the signal ...






