Mercedes-Benz GL-Class: Interior lighting control
Important notes
In order to prevent the vehicle's battery from discharging, the interior lighting functions are automatically deactivated after some time except for when the SmartKey is in position 2 in the ignition lock.
Automatic interior lighting control
► To switch on/off: press the
button.
When the automatic interior lighting control is activated, the button is flush with the overhead control panel.
The interior lighting automatically switches on if you:
• unlock the vehicle
• open a door
• remove the SmartKey from the ignition lock
The interior light is activated for a short while when the SmartKey is removed from the ignition lock. You can activate this delayed switch-off using the on-board computer.
Manual interior lighting control
► To switch the front interior lighting
on/off: press the button.
► To switch the rear interior lighting
on/off: press the button.
► To switch the reading lamps on/off:
press the button.
Overview of interior lighting
Overhead control panel
1 Switches the left-hand front
reading
lamp on/off
2 Switches the rear interior
lighting
on/off
3 Switches the automatic interior
lighting control on/off
4 Swit ...
Crash-responsive emergency lighting
The interior lighting is activated automatically
if the vehicle is involved in an accident.
► To switch off the crash-responsive
emergency lighting: press the hazard
warning lamp button.
...
See also:
Important safety notes
Level control adapts the vehicle level
automatically to the current operating and
driving situation. This results in reduced fuel
consumption and improved handling.
For vehicles with ADS: when y ...
Climate control
1. Temperature controls.
2. Seat heaters: Press once to turn on high, twice to turn on low, and a third
time to turn off.
3. Air distribution buttons: Press to select the desired distribution se ...
Removal and Installation of the Sealant Canister
To remove the sealant canister:
1. Unlock the air only hose (F) from the tire sealant canister (B) by pulling
up on the lever.
2. Pull the air only hose (F) from the tire sealant canister (B).
3 ...