Infiniti QX: Push-button ignition switch positions - Push-button ignition switch - Starting and driving - Infiniti QX Owner's ManualInfiniti QX: Push-button ignition switch positions

LOCK (Normal parking position)

The ignition switch can only be locked in this position. The ignition switch will be unlocked when it is pushed to the ACC position while carrying the Intelligent Key.

ACC (Accessories)

This position activates electrical accessories such as the radio, when the engine is not running.

ON (Normal operating position)

This position turns on the ignition system and electrical accessories.

OFF

The engine can be turned off in the position. The ignition lock is designed so that the ignition switch cannot be switched to the LOCK position until the selector lever is moved to the P (Park) position.

CAUTION
Do not leave the vehicle with the pushbutton ignition switch in ACC or ON positions when the engine is not running for an extended period. This can discharge the battery.

    Operating range for engine start function
    The operating range for starting the engine inside the vehicle 1 is shown in the illustration. ► If the Intelligent Key is on the instrument panel, cargo area, inside the glove box o ...

    Emergency engine shut off
    To shut off the engine in an emergency situation while driving, perform the following procedure: ► Rapidly push the push-button ignition switch 3 consecutive times in less than 1.5 sec ...

    See also:

    Warning displays
    The warning displays show the distance between the sensors and the obstacle. The warning display for the front area is located on the dashboard above the center air vents. The warning display fo ...

    DEF
    Important notes on use To function properly, BlueTEC exhaust gas aftertreatment must be operated with the reducing agent DEF. Adding DEF is one of the tasks performed during maintenance. Under no ...

    Traction – AA, A, B, C
    The traction grades, from highest to lowest, are AA, A, B, and C. Those grades represent the tire's ability to stop on wet pavement as measured under controlled conditions on specified governmen ...