Mercedes-Benz GL-Class: High-beam flasher
► To switch on: turn the SmartKey in the ignition lock to position 1 or 2 or start the engine.
► Pull the combination switch in the direction of arrow 3.
Turn signals
1 High-beam headlamps
2 Right turn signal
3 High-beam flasher
4 Left turn signal
► To indicate briefly: press the
combination
switch briefly to the pressure point in the
direction of a ...
Hazard warning lamps
The hazard warning lamps automatically
switch on if:
• an air bag is deployed.
• the vehicle is slowed down severely from a
speed of over 45 mph(70 km/h) and comes
to a halt.
► To ...
See also:
Cleaning the exterior
CAUTION
Following cleaning of the vehicle exterior (particularly with a pressure washer),
it is recommended that the vehicle is taken for a short drive to dry out the brakes.
Some high pressu ...
Clearing the programmed information
Individual buttons cannot be cleared,
however to clear all programming, push
and hold the two outside buttons and
release when the indicator light begins to
flash (in approximately 20 seconds) ...
Rear window defroster
Activating/deactivating
WARNING
Any accumulation of snow and ice should be
removed from the rear window before driving.
Visibility could otherwise be impaired,
endangering you and o ...






