Mercedes-Benz GL-Class: Combination switch
Headlamp cleaning system
The headlamps are cleaned automatically if
the "Wipe with washer fluid" function is
operated five times while the lights are on and
the engine is running. When you
switch off the ignitio ...
Turn signals
1 High-beam headlamps
2 Right turn signal
3 High-beam flasher
4 Left turn signal
► To indicate briefly: press the
combination
switch briefly to the pressure point in the
direction of a ...
See also:
Passenger Sensing System
The passenger sensing system, if equipped, turns off the front outboard passenger
frontal airbag under certain conditions. No other airbag is affected by the passenger
sensing system.
If the vehicl ...
Windshield Wiper/Washer
The front and rear wiper controls are located on the turn and lane-change lever.
Turn the band with the wiper symbol to control the windshield wipers.
: For a single wipe, turn to
, then release. ...
Changing the set speed whilethe vehicle is in motion
When DSR is activated, the control speed can
be changed to a value between 3 mph and
10 mph (Canada: between 4 km/h and
18 km/h) during the journey.
► To increase or decrease in 1 mph
(Ca ...






