Mercedes-Benz GL-Class: Important safety notes
WARNING
Severe conditions (e.g. strong air pollution) may require replacement of the
filter before
its scheduled replacement interval. A clogged
filter will reduce the air volume to the interior
and the windows could fog up, impairing
visibility and endangering you and others.
Have a blocked filter replaced at a Mercedes-
Benz Center as soon as possible.
WARNING
Follow the recommended settings for heating
and cooling given on the following pages.
Otherwise, the windows could fog up,
impairing visibility and endangering you and
others.
The automatic climate control13 adjusts the temperature and the humidity of the vehicle interior and filters undesired substances from the air.
The automatic climate control13 is only operational when the engine is running.14 Optimum operation is only achieved when you drive with the side windows and the sliding sunroof closed.
Ventilate the vehicle for a brief period
during warm weather, e.g. using the
convenience opening feature.
This will speed up the cooling process and the desired vehicle interior temperature will be reached more quickly.
The integrated filter can filter out most
particles of dust and completely filters out
pollen. A clogged filter reduces the amount
of air supplied to the vehicle interior. For
this reason, you should always observe the
interval for replacing the filter, which is
specified in the Service Booklet. As it
depends on environmental conditions, e.g.
heavy air pollution, the interval may be shorter than stated in the Service Booklet.
Control panel for dual-zone automatic climate control
1 To set the temperature, left
2 To set climate control to automatic
3 To defrost the windshield
4 To increase the airflow
5 To direct the airflow through the defroster vents
6 To activate/deac ...
See also:
Programming Universal Home Remote — Rolling Code
For questions or help programming the Universal Home Remote System, call 1-866-572-2728
or go to www.learcar2u.com.
Most garage door openers sold after 1996 are Rolling Code units. Programming
a ga ...
Rear Display
Press the Rear Display(s) screen button to allow the choice of sources for rear
display between front disc, rear aux, or usb, if connected. ...
Rear Seats
A. Seat Adjustment Handle
B. Reclining Seatback Strap
C. Sliding Seat Lever
Entering and Exiting the Third Row
WARNING
Using the third row seating position while the second row is folded, or fo ...







