Mercedes-Benz GL-Class: Control panel for dual-zone automatic climate control
1 To set the temperature, left
2 To set climate control to automatic
3 To defrost the windshield
4 To increase the airflow
5 To direct the airflow through the defroster vents
6 To activate/deactivate cooling with air dehumidification
7 To set the temperature, right
8 To switch rear-compartment climate control on/off
9 To direct the airflow through the center and side air vents
10 To direct the airflow to the footwells and side air vents
11 To display the airflow level
12 To reduce the airflow
13 To switch the rear window defroster on/off
14 To activate/deactivate air-recirculation mode
15 Interior temperature sensor
16 To switch climate control on/off
Important safety notes
WARNING
Severe conditions (e.g. strong air pollution) may require replacement of the
filter before
its scheduled replacement interval. A clogged
filter will reduce the air volume to t ...
Notes on using dual-zone automaticclimate control
The following contains notes and
recommendations on optimum use of dualzone
automatic climate control.
• Activate climate control using the
and
buttons. The indicator lamps in the
and
b ...
See also:
Braking in Emergencies
ABS allows the driver to steer and brake at the same time. In many emergencies,
steering can help more than even the very best braking. ...
Instrument Panel Illumination Control
(Instrument Panel Brightness): This
feature controls the brightness of the instrument panel lights and is located next
to the exterior lamps control.
Push the knob to extend out and then it can ...
Before programing
NOTICE
When programing a device that may require you to press and re-press the hand-held
transmitter (cycle), unplug the device during the cycling process to prevent possible
motor failure.
...
