Mercedes-Benz GL-Class: Notes on using dual-zone automaticclimate control
The following contains notes and recommendations on optimum use of dualzone automatic climate control.
• Activate climate control using the
and
buttons. The indicator lamps in the
and
buttons light up.
• Set the temperature to 72 °F (22 °C).
• Only use the "defrosting" function briefly
until the windshield is clear again.
• Only use "air-recirculation" mode briefly,
e.g. if there are unpleasant outside odors or when in a tunnel. The windows
could
otherwise fog up as, in air-recirculation
mode, no fresh air is drawn into the vehicle.
• Use the residual heat function if you want
to heat or ventilate the vehicle interior
when the ignition is switched off. The
"residual heat" function can only be
activated or deactivated with the ignition
switched off.
Control panel for dual-zone automatic climate control
1 To set the temperature, left
2 To set climate control to automatic
3 To defrost the windshield
4 To increase the airflow
5 To direct the airflow through the defroster vents
6 To activate/deac ...
Control panel for 3-zone automatic climate control
Canada only
Front control panel
1 To set the temperature, left
2 To set climate control to automatic
3 To direct the airflow through the defroster vents, left
4 To defrost the windshield
5 To ...
See also:
Fuses
Engine compartment ...
Engine Exhaust
WARNING
Engine exhaust contains carbon monoxide (CO) which cannot be seen or smelled.
Exposure to CO can cause unconsciousness and even death.
Exhaust may enter the vehicle if:
The vehicle ...
Operating the jack
1. Locate the jack under the recommended jacking point.
2. Attach the cranking lever to the jack using the adaptor. Fit the wheel nut
brace to the end of the cranking lever and rotate clockwise t ...
