Cadillac Escalade: Guidelines - Rear Vision Camera (RVC) - Object Detection Systems - Driving and Operating - Cadillac Escalade Owner's ManualCadillac Escalade: Guidelines

The RVC system has a guideline overlay that can help the driver align the vehicle when backing into a parking spot.

To turn the guidelines on or off:

1. Make sure that URPA has not been disabled.

2. Shift into P (Park).

3. Press the CONFIG hard key to enter the configure menu options, then press the CONFIG hard key to select Display or touch the Display screen button.

4. Select the Rear Camera Options screen button. The Rear Camera Options screen displays.

5. Touch the Guidelines screen button. The screen button will be highlighted when on.

    Symbols
    The navigation system may have a feature that allows for viewing parking assist symbols on the navigation screen while using the RVC. The Ultrasonic Rear Park Assist (URPA) system must not be disabl ...

    RVC Location
    The camera is located above the license plate. This shows the field of view that the camera provides. A. View displayed by the camera A. View displayed by the camera B. Corners of the rear b ...

    See also:

    Checking the tire pressures
    WARNING All tire pressures, including the spare, should be checked regularly using an accurate pressure gauge, when the tires are cold. Failure to properly maintain your tire pressures could ...

    Roof
    Sunroof A. Open or Close B. Vent On vehicles with a sunroof, the sunroof only operates when the ignition is in the ACC/ACCESSORY or ON/RUN, or when Retained Accessory Power (RAP) is active. See ...

    Using snow chains
    WARNING Only use traction devices in heavy snow conditions, on hard road surfaces. Dynamic Stability Control (DSC) must be switched off when using traction devices. Never exceed 30 mph (50 km/ ...