Cadillac Escalade: Symbols - Rear Vision Camera (RVC) - Object Detection Systems - Driving and Operating - Cadillac Escalade Owner's ManualCadillac Escalade: Symbols

The navigation system may have a feature that allows for viewing parking assist symbols on the navigation screen while using the RVC. The Ultrasonic Rear Park Assist (URPA) system must not be disabled to use the caution symbols. If URPA has been disabled and the symbols have been turned on, the Rear Parking Assist Symbols Unavailable error message may display. See Ultrasonic Parking Assist  .

The symbols appear near objects detected by the URPA system. The symbol may cover the object when viewing the navigation screen.

To turn the symbols on or off:

1. Make sure that URPA has not been disabled.

2. Shift into P (Park).

3. Press the CONFIG hard key to enter the configure menu options, then press the CONFIG hard key to select Display or touch the Display screen button.

4. Select the Rear Camera Options screen button. The Rear Camera Options screen displays.

5. Touch the Symbols screen button. The screen button will be highlighted when on.

    Turning the RVC System On or Off
    The RVC system is designed to help the driver when backing up by displaying a view of the area behind the vehicle. When the vehicle is shifted into R (Reverse), the video image appears on the naviga ...

    Guidelines
    The RVC system has a guideline overlay that can help the driver align the vehicle when backing into a parking spot. To turn the guidelines on or off: 1. Make sure that URPA has not been disabled. ...

    See also:

    Ultrasonic Parking Assist
    If available, the Ultrasonic Rear Parking Assist (URPA) system assists the driver with parking and avoiding objects while in R (Reverse). URPA operates at speeds less than 8 km/h (5 mph). The sen ...

    Canadian Vehicle Owners
    Propriétaires Canadiens ► French language copy of this manual can be obtained from your dealer or from: On peut obtenir un exemplaire de ce guide en français auprès du c ...

    Setting the specified minimum distance
    You can set the specified minimum distance for DISTRONIC by varying the time span between one and two seconds. This time span determines the distance that DISTRONIC should maintain from the vehicl ...