Range Rover: Using RSE
The system is operated using the remote control.
To release the remote from the docked position, press at the top of the remote to unlatch it.
NOTICE
Do not attempt to pull the remote control out of its docked position.
When the system is activated the remote control touch screen becomes active.
Using the appropriate button (6 or 10) or on screen soft key (right or left) to select the required screen, will allow options to be set and selected.
Note: A help screen is available from each screen/menu. To view the help screen for guidance on the available functions and options, touch the question mark (?) icon.
Remote control
1. Press to undock remote control.
NOTICE
Do not press the touch screen to undock the remote control.
2. Touch screen.
3. Home screen.
4. Video source.
5. Audio source.
6. Right screen s ...
Headphones
The volume control for each set of headphones is adjusted on the headphones.
Press the channel selector button to cycle through available channels. Select
the channel appropriate for the required s ...
See also:
Cleaning the rear view camera
► Use clear water and a soft cloth to
clean
camera lens 1.
Do not clean the camera lens and the area
around the rear view camera with a power
washer. ...
Breaking-in notes
The first 1000 miles (1500 km)
The more you look after the engine when it is
new, the more satisfied you will be with its
performance in the future.
• Drive at varying vehicle speeds and
engin ...
Before starting the engine
► Make sure the area around the vehicle
is clear.
► Check fluid levels such as engine oil,
coolant, brake fluid and window
washer fluid as frequently as possible,
or at least whe ...
