Buick Enclave: Exterior Lamp Controls - Exterior Lighting - Lighting - Buick Enclave Owner's ManualBuick Enclave: Exterior Lamp Controls

The exterior lamps control is located on the instrument panel to the left of

The exterior lamps control is located on the instrument panel to the left of the steering wheel.

It controls the following systems:

► Headlamps
► Taillamps
► Parking Lamps
► License Plate Lamps
► Instrument Panel Lights
► Fog Lamps (If equipped)

The exterior lamps control has four positions:

to turn the automatic light control off or on again. (Off): Briefly turn to this position to turn the automatic light control off or on again.

AUTO (Automatic): Turns the headlamps on automatically at normal brightness, together with the following:

► Parking Lamps . Taillamps . License Plate Lamps . Instrument Panel Light

lamps on together with the following: (Parking Lamps): Turns the parking lamps on together with the following:

► Taillamps
► License Plate Lamps
► Instrument Panel Lights

on together with the following lamps. A warning chime sounds if the driver door(Headlamps): Turns the headlamps on together with the following lamps. A warning chime sounds if the driver door is opened when the ignition switch is off and the headlamps are on.

► Parking Lamps
► Taillamps
► License Plate Lamps

► Instrument Panel Lights Turns on the fog lamps (if equipped). (Fog Lamps): Turns on the fog lamps (if equipped).

See Fog Lamps .

    Headlamp High/ Low-Beam Changer
    Headlamp High/Low-Beam Changer: Push the turn signal/lane change lever away from you to turn the high beams on. Pull the lever toward you to return to low beams. This indicator light turns on i ...

    See also:

    Daytime Running Lamps (DRL)
    Daytime Running Lamps (DRL) can make it easier for others to see the front of your vehicle during the day. Fully functional daytime running lamps are required on all vehicles first sold in Canada. ...

    Changing engine oil and filter
    Vehicle set-up 1. Park the vehicle on a level surface and apply the parking brake. 2. Run the engine until it reaches operating temperature. 3. Turn the engine off and wait more than 15 min ...

    Traction Control Operation
    TCS is part of the StabiliTrak system. Traction control limits wheel spin by reducing engine power to the wheels (engine speed management) and by applying brakes to each individual wheel (brake-trac ...