Mercedes-Benz GL-Class: Setting the air vents - Climate control - Mercedes-Benz GL-Class Owner's ManualMercedes-Benz GL-Class: Setting the air vents

Activating/deactivating the residualheat function
It is possible to make use of the residual heat of the engine to continue heating the stationary vehicle for up to 30 minutes after the engine has been switched off. The heating time depends on th ...

Important safety notes
WARNING   When operating the climate control, the air that enters the passenger compartment through the air vents can be very hot or very cold (depending on the set temperature). This c ...

See also:

Using the Tire Sealant and Compressor Kit without Sealant to Inflate a Tire (Not Punctured)
To use the air compressor to inflate a tire with air only and not sealant: If a tire goes flat, avoid further tire and wheel damage by driving slowly to a level place. Turn on the hazard warning f ...

Windshield Wiper/Washer
The front wiper control is located on the turn and lane-change lever. Turn the band with the wiper symbol to control the windshield wipers. (Mist): For a single wipe, turn to , then release. For ...

Forward alert function
Limited detection and warning of objects ahead, is provided during ACC operation by the ACC DRIVER INTERVENE warning. The forward alert feature additionally provides warnings when ACC is not engag ...