Infiniti QX: Seat belt maintenance
► To clean the seat belt webbing, apply a
mild soap solution or any solution
recommended for cleaning upholstery
or carpets. Then, wipe with a cloth and
allow the seat belts to dry in the shade.
Do not allow the seat belts to retract
until they are completely dry.
► If dirt builds up in the shoulder belt
guide of the seat belt anchors, the seat belts may retract slowly. Wipe the
shoulder belt guide with a clean, dry
cloth.
► Periodically check to see that the seat
belt and the metal components such as
buckles, tongues, retractors, flexible
wires and anchors work properly. If
loose parts, deterioration, cuts or other
damage on the webbing is found, the
entire seat belt assembly should be
replaced.
Seat belt extenders
If, because of body size or driving position,
it is not possible to properly fit the lapshoulder
belt and fasten it, an extender
that is compatible with the installed seat
belts is available t ...
Child safety
WARNING
Do not allow children to play with the seat
belts. Most seating positions are equipped
with Automatic Locking Retractor (ALR)
mode seat belts. If the seat belt becomes
wrapped aroun ...
See also:
Setting the exterior
If the battery has been disconnected or
completely discharged, the exterior mirrors
must be reset. The exterior mirrors will
otherwise not fold in when you select the
"Fold in mirrors when lo ...
Loading the Vehicle for Off-Road Driving
WARNING
Unsecured cargo on the load floor can be tossed about when driving over
rough terrain. You or your passengers can be struck by flying objects. Secure
the cargo properly.
Keep car ...
Door lock and release levers
From inside the vehicle, all the doors can be locked by pressing either the driver
or passenger lock lever (1).
Each rear door can be individually locked by pressing the appropriate locking
lev ...