Infiniti QX: Seat belt extenders
If, because of body size or driving position, it is not possible to properly fit the lapshoulder belt and fasten it, an extender that is compatible with the installed seat belts is available that can be purchased. The extender adds approximately 8 in (200 mm) of length and may be used for either the driver or front passenger seating position. See an INFINITI retailer for assistance with purchasing an extender if an extender is required.
WARNING
► Only INFINITI seat belt extenders, made
by the same company which made the
original equipment seat belts, should be
used with the INFINITI seat belts.
► Adults and children who can use the
standard seat belt should not use an
extender. Such unnecessary use could
result in serious personal injury in the
event of an accident.
► Never use seat belt extenders to install
child restraints. If the child restraint is
not secured properly, the child could be
seriously injured in a collision or a
sudden stop.
Three-point type seat belt
WARNING
► Every person who drives or rides in this
vehicle should use a seat belt at all
times.
► Do not ride in a moving vehicle when the
seatback is reclined. This can be dang ...
Seat belt maintenance
► To clean the seat belt webbing, apply a
mild soap solution or any solution
recommended for cleaning upholstery
or carpets. Then, wipe with a cloth and
allow the seat belts to dry in th ...
See also:
Attaching the cargo net
Cargo net attached behind the C-pillar
► Insert guide rod 2 into retainer 1 in
the
direction of the arrow.
► Slide guide rod 2 forwards into
retainer 1 in the direction of the arro ...
Checking the coolant level
NOTICE
Running the engine without coolant will cause serious engine damage.
The coolant level in the expansion tank should be checked at least weekly (more
frequently in high mileage or arduo ...
Pairing and connecting using the mobile phone
Note: The process of pairing and connecting your phone with the vehicle using
the mobile phone will vary depending on the type of mobile phone used.
1. Switch the ignition system on and ensure that ...