Cadillac Escalade: Automatic Operation, If Equipped
AUTO: Press the air delivery mode button until this setting is selected to control the inside temperature, air delivery, and fan speed. AUTO appears in the display when automatic operation is active.
+ or − (Increase/Decrease Temperature): Press the + or − buttons to increase or decrease the cabin temperature. The rear control temperature display will show the temperature setting increasing or decreasing.
The display only indicates climate control functions when the system is in rear independent mode.
Rear Climate Control System (Rear Climate with Rear Seat Audio)
For vehicles with the rear heat and air conditioning controls, they are integrated
with the rear seat audio controls located in the center console. The system can
be controlled from the front contro ...
Manual Operation
(Fan Control): Press these buttons
on the rear seat audio control panel to increase or decrease the airflow. Pressing
the fan up button when the system is off will turn the system on. The air deliv ...
See also:
Troubleshooting guide
The system should respond correctly to all voice commands without difficulty.
If problems are encountered, follow the solutions given in
this guide for the appropriate error.
Where the solutions ...
Off-road recovery
If the right side or left side wheels
unintentionally leave the road surface,
maintain control of the vehicle by following
the procedure below. Please note that this
procedure is only a genera ...
Compass
Your vehicle may have a compass in the Driver Information Center (DIC).
Compass Zone
The zone is set to zone eight upon leaving the factory. Your dealer will set
the correct zone for your location. ...
