Mercedes-Benz GL-Class: Notes on using dual-zone automaticclimate control
The following contains notes and recommendations on optimum use of dualzone automatic climate control.
• Activate climate control using the
and
buttons. The indicator lamps in the
and
buttons light up.
• Set the temperature to 72 °F (22 °C).
• Only use the "defrosting" function briefly
until the windshield is clear again.
• Only use "air-recirculation" mode briefly,
e.g. if there are unpleasant outside odors or when in a tunnel. The windows
could
otherwise fog up as, in air-recirculation
mode, no fresh air is drawn into the vehicle.
• Use the residual heat function if you want
to heat or ventilate the vehicle interior
when the ignition is switched off. The
"residual heat" function can only be
activated or deactivated with the ignition
switched off.
Control panel for dual-zone automatic climate control
1 To set the temperature, left
2 To set climate control to automatic
3 To defrost the windshield
4 To increase the airflow
5 To direct the airflow through the defroster vents
6 To activate/deac ...
Control panel for 3-zone automatic climate control
Canada only
Front control panel
1 To set the temperature, left
2 To set climate control to automatic
3 To direct the airflow through the defroster vents, left
4 To defrost the windshield
5 To ...
See also:
When reading the manual
This manual includes information for all
options available on this model. Therefore,
you may find some information that does
not apply to your vehicle.
All information, specifications and illu ...
Trip computer
Switches for the trip computer are located
on the right side of the combination meter
panel. To operate the trip computer, push
the switches as shown above.
When the ignition switch is push ...
Guidelines
The RVC system has a guideline overlay that can help the driver align the vehicle
when backing into a parking spot.
To turn the guidelines on or off:
1. Make sure that URPA has not been disabled.
...
