Buick Enclave: StabiliTrak® System
The vehicle has a traction control system that limits wheel spin, and the StabiliTrak system that assists with directional control of the vehicle in difficult driving conditions.
Both systems turn on automatically every time the vehicle is started.
► To turn off traction control, press and release
located on the instrument panel, and
the appropriate DIC message displays. See Ride Control System Messages .
► Press and release 
again to turn on
the traction control system. The StabiliTrak system remains on.
For more information, see StabiliTrak® System .
Tire Pressure Monitor
This vehicle may have a Tire Pressure Monitor System (TPMS).
The TPMS warning light alerts you to a significant loss in pressure of one of
the vehicle's tires. If the warning light comes on, ...
See also:
Removing the Third Row Seat
To remove the seat:
1. Open the liftgate to access the controls for the seat.
2. Fold the seatbacks forward using lever “1” and the instructions listed previously
under “Folding the Seatback. ...
Battery Replacement
To change the remote control batteries:
1. Slide the rear cover back on the remote control.
2. Replace the two batteries in the compartment. Make sure they are installed
correctly using the diagram ...
TPMS Sensor Matching Process
Each TPMS sensor has a unique identification code. The identification code needs
to be matched to a new tire/wheel position after rotating the vehicle’s tires or
replacing one or more of the TPMS ...
