Mercedes-Benz GL-Class: Memory functions
Parking position for the exteriormirror on the front-passenger side
Setting and storing the parking position
You can position the front-passenger side
exterior mirror in such a way that you can see
the rear wheel on that side as soon as you
engage reverse gear. Yo ...
Storing settings
With the memory function, you can store up
to three different settings, e.g. for three
different people.
The following settings are stored as a single
memory preset:
• position of the seat, ...
See also:
Compass
Your vehicle may have a compass in the Driver Information Center (DIC).
Compass Zone
The zone is set to zone eight upon leaving the factory. Your dealer will set
the correct zone for your location. ...
Ascending steep slopes
When ascending steep slopes with HDC selected, the vehicle will allow full control
to the driver in the normal manner. If HDC is switched off, the maximum vehicle
speed will be limited to allow mo ...
Programing
With the engine switched off;
1. Ensure that the ignition system is on.
2. Hold the end of the original garage door opener hand-held transmitter 2 to
6 inches (50 to 150 mm) away from the transc ...






