High Intensity Discharge (HID) Lighting

WARNING The low beam high intensity discharge lighting system operates at a very high voltage. If you try to service any of the system components, you could be seriously injured. Have your deal ...

Back-Up Lamps

To replace this bulb: 1. Open the liftgate. See Liftgate   for more information. 2. Remove the two screws from the taillamp assembly. 3. Pull the taillamp assembly rearward until the ...

See also:

Clearing the programmed information
Individual buttons cannot be cleared, however to clear all programming, push and hold the two outside buttons and release when the indicator light begins to flash (in approximately 20 seconds) ...

System self-test
The 42 indicator lamp illuminates when you: • turn the SmartKey to position 1 or 2 in the ignition lock • on vehicles with KEYLESS-GO, press the Start/Stop button once or twice The indica ...

Windshield Wipers
If the wiper motor overheats due to heavy snow or ice, the windshield wipers will stop until the motor cools and will then restart. Although the circuit is protected from electrical overload, overlo ...