Buick Enclave: Brake System Messages - Information Displays - Instruments and Controls - Buick Enclave Owner's ManualBuick Enclave: Brake System Messages

SERVICE BRAKE SYSTEM

This message displays along with the brake system warning light if there is a problem with the brake system. See Brake System Warning Light . If this message appears, stop as soon as possible and turn off the vehicle. Restart the vehicle and check for the message on the DIC display. If the message is still displayed or appears again when you begin driving, the brake system needs service as soon as possible. See your dealer.

    Battery Voltage and Charging Messages
    BATTERY SAVER ACTIVE This message displays when the system detects that the battery voltage is dropping below expected levels. The battery saver system starts reducing certain features of the veh ...

    Cruise Control Messages
    CRUISE SET TO XXX This message displays whenever the cruise control is set. See Cruise Control  for more information. ...

    See also:

    High-beam flasher
    ► To switch on: turn the SmartKey in the ignition lock to position 1 or 2 or start the engine. ► Pull the combination switch in the direction of arrow 3. ...

    Jump-starting
    WARNING   Failure to follow these directions will cause damage to the electronic components, and can lead to a battery explosion and severe injury or death. Never lean over batteries wh ...

    Cruise Control Messages
    CRUISE SET TO XXX This message displays whenever the cruise control is set. See Cruise Control  for more information. ...