Infiniti QX: In-cabin microfilter
Models without Advanced Climate Control System:
The climate control system is equipped with an in-cabin microfilter which collects dirt, pollen, dust, etc. To make sure the air conditioner heats, defogs, and ventilates efficiently, replace the filter in accordance with the maintenance schedule in the INFINITI Service and Maintenance Guide. To replace the filter, contact an INFINITI retailer. The filter should be replaced if air flow is extremely decreased or when windows fog up easily when operating heater or air conditioning system. Models with Advanced Climate Control System: The climate control system is equipped with a natural grape seed polyphenol filter which collects and neutralizes dirt, pollen, dust, etc. To make sure that the air conditioner heats, defogs and ventilates efficiently, replace the filter in accordance with the maintenance schedule in the INFINITI Service and Maintenance Guide. To replace the filter, contact an INFINITI retailer. The filter should be replaced if the air flow decreases significantly or if windows fog up easily when operating the heater or air conditioner.
Linking intelligent key
The Climate control system settings can be
memorized for each Intelligent Key. For
more details, see “Setting memory function”
in the “3. Pre-driving checks and
adjustments” section. ...
Servicing climate control
The climate control system in your INFINITI
is charged with a refrigerant designed with
the environment in mind. This refrigerant
will not harm the earth’s ozone layer.
However, special char ...
See also:
System maintenance
► The two radar sensor units 1 for the
BSW and Blind Spot InterventionTM
systems are located near the rear
bumper. Always keep the area near
the radar sensors clean. Do not attach
st ...
Cooling System
The cooling system allows the engine to maintain the correct working temperature.
A. Engine Coolant Recovery Tank
B. Radiator Pressure Cap
C. Engine Cooling Fans (Out of View)
WARNING
An electr ...
Tool kit
Note: Tool types and positions may vary from the illustrations.
The tool kit is located under a panel set in the loadspace floor.
Note: Take careful note of the stowage position for each tool, as ...






