Infiniti QX: Installing top tether strap (3rd row bench seat) - Child restraints - Safety — seats, seat belts and supplemental restraint system - Infiniti QX Owner's ManualInfiniti QX: Installing top tether strap (3rd row bench seat)


3rd row bench seat

In the 3rd row bench seat, a child restraint WARNING
In the 3rd row bench seat, a child restraint with a top tether strap can only be used in the center position. Do not place in an outboard seating position and attempt to angle the tether strap to the center position.

The center position of the 3rd row bench seat is the seating position that can use a top tether strap. First, secure the child restraint with the seat belt, as applicable. 1. Position the top tether strap over the top of the center seating position seatback. 2. Secure the tether strap to the tether anchor point on the floor behind the child restraint. 3. Refer to the appropriate child restraint installation procedure steps in this section before tightening the tether strap. If you have any questions when installing a top tether strap, consult your INFINITI retailer for details.

    Installing top tether strap (2nd row captain’s seats or 2nd row bench seat)
    2nd row bench seat First, secure the child restraint with the LATCH lower anchors (2nd row captain’s or bench outboard seating positions only) or the seat belt, as applicable. 1. If ...

    Booster seats
    Precautions on booster seats WARNING If a booster seat and seat belt are not used properly, the risk of a child being injured in a sudden stop or collision greatly increases: ► Make su ...

    See also:

    Important safety notes
    WARNING   Grains of sand, particles of dirt and other abrasive materials can enter the brake system. This can lead to excessive wear and unpredictable braking efficiency. After the bra ...

    Voltmeter
    When the ignition switch is pushed to the ON position, the volt meter indicates the battery voltage. When the engine is running, it indicates the generator voltage. While cranking the engine ...

    Locking and arming the alarm
    WARNING Before exiting the vehicle, always ensure that the gear selector is in the Park (P) position, the engine is turned off, the parking brake is applied and the Smart Key is removed from ...