Vehicle Dynamic Control (VDC) system

The Vehicle Dynamic Control (VDC) system uses various sensors to monitor driver inputs and vehicle motion. Under certain driving conditions, the VDC system helps to perform the following funct ...

Freeing a frozen door lock

To prevent a door lock from freezing, apply deicer through the key hole. If the lock becomes frozen, heat the key before inserting it into the key hole or use the Intelligent Key system. ...

See also:

Resuming the speed and follow mode
NOTICE RESUME should only be used if the driver is aware of the set speed and intends to return to it. By pressing the RESUME button after ACC has been cancelled (e.g. after braking), the A ...

Window reset
The windows will need to be reset if the battery is disconnected, becomes discharged or power supply is interrupted. Reset as follows: 1. Close the window fully. 2. Release the switch, then lift ...

Removing the vehicle battery
WARNING Switch the ignition off before disconnecting battery terminals. Always disconnect the negative terminal first and reconnect last. Use caution when lifting the battery out of, or into, ...