Turn signal lamps/side marker lamps

► Switch off the lights. ► Open the hood. ► Turn bulb holder 1 (WY 5 W)/2 (3457A) counter-clockwise and pull it out. ► Remove the bulb from bulb holder 1/2. ► Inse ...

Opening and closing the side trimpanels

You must open the side trim panel in the cargo compartment before you can change the bulbs in the tail lamps. Left-hand side trim panel ► To open: turn release knob 1 90° in the directio ...

See also:

Trailer power supply
The trailer power socket of your vehicle is designed for connecting the 7-pin connector supplied as part of the Mercedes-Benzapproved trailer coupling. Depending on your trailer, you may need an ...

Turn signal lamps/side marker lamps
► Switch off the lights. ► Open the hood. ► Turn bulb holder 1 (WY 5 W)/2 (3457A) counter-clockwise and pull it out. ► Remove the bulb from bulb holder 1/2. ► Inse ...

Trailer electrical connection
NOTICE Only connect approved electrical circuits, which are in good condition, to the trailer socket. When a trailer electrical connection is made, and the vehicle’s direction indicators ...