Infiniti QX: Engine coolant temperature gauge - Meters and gauges - Instruments and controls - Infiniti QX Owner's ManualInfiniti QX: Engine coolant temperature gauge

The gauge indicates the engine coolant temperature. The engine coolant temperature is within the normal range when the gauge needle points within the zone 1 shown in the illustration. The engine coolant temperature varies with the outside air temperature and driving conditions.

CAUTION
If the gauge indicates engine coolant temperature near the hot (H) end of the normal range, reduce vehicle speed to decrease temperature. If gauge is over the normal range, stop the vehicle as soon as safely possible. If the engine is overheated, continued operation of the vehicle may seriously damage the engine. See “If your vehicle overheats” in the “6. In case of emergency” section for immediate action required.

    Tachometer
    The tachometer indicates engine speed in revolutions per minute (RPM). Do not rev the engine into the red zone 1 . CAUTION When engine speed approaches the red zone, shift to a higher gea ...

    Fuel gauge
    The gauge indicates the approximate fuel level in the tank. The gauge may move slightly during braking, turning, acceleration, or going up or down hills. The gauge needle returns to 0 (Emp ...

    See also:

    Engine Compartment Overview
    A. Radiator Pressure Cap. See Cooling System . B. Engine Coolant Recovery Cap. See Cooling System . C. Remote Negative (−) Terminal. See Jump Starting . D. Engine Compartment Fuse Block . ...

    Using ACC
    1. SET+: Press to increase or set the speed. 2. Press to resume the set speed. 3. Press to decrease the set speed. 4. CAN: Cancels, but retains the set speed in memory. 5. Press to decrease the ...

    TPMS Sensor Matching Process
    Each TPMS sensor has a unique identification code. The identification code needs to be matched to a new tire/wheel position after rotating the vehicle’s tires or replacing one or more of the TPMS ...