Range Rover: Changing from low to high range
With the vehicle traveling no faster than 38 mph (60 km/h), select N. Press the front of the transfer gearbox switch to select Hi.
Indication of the range change status is the same as for the stationary method.
Now select D.
Automatic transmission high to low range
1. With the vehicle slowing down, and traveling between 24 mph (40 km/h)
and 2 mph (3 km/h), select N.
2. Press the rear of the transfer gearbox switch to select Lo.
3. Wait for the range ch ...
See also:
Manual Mode
Driver Shift Control (DSC)
The vehicle has Driver Shift Control (DSC). DSC controls the vehicle's transmission
and vehicle speed while driving down hill or towing a trailer by allowing you to
...
4WD warning light
The 4WD warning light is located in the
meter.
The 4WD warning light comes on when the
ignition switch is placed in the ON position.
It turns off soon after the engine is
started.
If any ...
Preparing the cargo net
The cargo net can be used in two different
positions (behind the B-pillar or the C-pillar).
• The brackets behind B-pillar : are
required for the cargo compartment
enlargement.
The correspo ...
