Range Rover: Switching on the ignition - Starting the engine - Range Rover Owner's ManualRange Rover: Switching on the ignition

To turn on the ignition without starting the engine. Ensure the brake pedal is not depressed, and with a valid Smart Key present in the vehicle, press the START/STOP button and hold until the warning lamps illuminate, then release the button.

NOTICE NOTICE

If the brake pedal is applied when the start/stop button is pressed, the engine will start.

    Starting the engine
    WARNING Never start the engine and leave it running when the vehicle is in an enclosed space. Exhaust gases are poisonous and can cause unconsciousness and death if inhaled. NOTICE The ...

    See also:

    Vehicles without extended Off-Road Proengineering package
    Basic setting The extent to which the vehicle is raised or lowered depends on the basic setting selected. Select: • Raised level, for driving on normal off-road terrain • Highway/high-s ...

    Points to observe before use
    The socket in the center console and the socket in the cargo compartment are not intended for operating the tire inflation compressor. The sockets can be used for accessories, e. g. lamps o ...

    How to Inspect the Engine Air Cleaner/Filter
    To inspect the air cleaner/filter, remove the engine air cleaner/filter from the vehicle by following Steps 1 through 6. When the engine air cleaner/filter is removed, lightly shake it to release lo ...