Cadillac Escalade: Weight-Distributing Hitch Adjustment
A. Body to Ground Distance
B. Front of Vehicle
When using a weight-distributing hitch, the spring bars should be adjusted so the distance (A) is the same after coupling the trailer to the tow vehicle and adjusting the hitch.
Hitches
The correct hitch equipment helps maintain combination control. Many trailers
can be towed with a weight carrying hitch which simply features a coupler latched
to the hitch ball, or a tow eye latche ...
Hitch Cover (without Dual Exhaust)
The vehicle may have a hitch cover. To remove the hitch cover:
1. Turn the fasteners on the lower tabs 90 degrees counterclockwise.
2. Lift the lower edge of the cover about 45 degrees.
3. Pull t ...
See also:
Off-road navigation
The system can be switched between On-road and Off-road navigation by pressing
the fascia NAV button twice, from anywhere in the system, then selecting On road
or Off road as required. Alternative ...
Installing/removing the towing eye
Installing the towing eye
Vehicles with a trailer tow hitch: if possible
secure the towing device on the trailer tow
hitch.
► Remove the towing eye from the vehicle
tool kit.
WARNING&nbs ...
SBZA Detection Zones
The SBZA sensor covers a zone of approximately one lane over from both sides
of the vehicle, 3.5m (11 ft). This zone starts at each side mirror and goes back
approximately 5.0m(16 ft). The height ...
